CrossoverGPS FAQ
(frequently asked questions)

To transfer your maps to your computer;

You will need a card reader and to have Mapsend Lite installed on your PC
Your map card will need to be authorised first. If it is not then return it to GPSOZ for authorization.
Using a card reader and MapsendLite V2 beta, you can transfer these maps and view them on your computer.

Link to our MapSend Lite page

To export/import waypoints/routes;

How to export/import your waypoints/routes from the CrossoverGPS (Outdoor mode and topo card) to Mapsend Lite.
To import data from Mapsend Lite to the CrossoverGPS do the following.
Mark your waypoints in Mapsend Lite.
Insert the topo card or a blank card into the Card Reader
Then go to GPS Manager > waypoints > save to file > SD Programmer.  The file will then save as a *.upt file.

Put the card back into the CrossoverGPS.
Goto Options in the outdoor mode setting.
Select Import Data > Waypoints.
Browse to where you saved the file to on the card, then select your file.
Your waypoints should now be in the CrossoverGPS.

To export your data from the CrossoverGPS to Mapsend Lite.
Go to Options in the outdoor mode setting.
Select export Data > Waypoints
Type out the file name of the export file.

Open up Mapsend Lite
Go to GPS Manager > Waypoints > Load from file > SD Programmer. 
Choose your file then hit OK
All your waypoints will then be on your computer screen.

Importing waypoints from the Outdoor mode into the Vehicle Navigation mode;

Import your waypoints that you've created in Mapsend Lite to the SD card in a card reader
To do that, in MapSend Lite, go to GPS Contents > waypoints > Save to file then choose the SD card drive letter

Once done put the Crossover into Outdoor mode. 
Then go to Options> Import Data > Waypoints > then choose your waypoint file.

Put the Crossover into Vehicle Nav mode.
Go to Enter Address > My Addresses > Address Book > List Waypoints.
There you should see all your saved waypoints. 
You will need to add them to the address book of the Vehicle Nav mode. 
To do that, select the waypoints that you want, then hit the save button.You can add them to the favourites if you like by hitting the favourites button before hitting the save button.

Once you have selected your waypoints in the step above go to
Trip Planner > New > Enter Trip Name > Add > address book > List All and add the waypoints that you want for your trip. 

Trips in Vehicle mode need to be planned on the GPS and there is a maximum of 20 points per trip

Is DiscoverAus Street by Street Crossover on SD card, available as a separate product?

No sorry.